Induksjonsmaskin

HM35 kan brukes til forvarming, etter sveisebehandling (pwht), krympefit og andre formål.

Det er to alternativer for styring av HM35: trinnløs manuelt og halvautomatisk varmeinnstilling.

Temperaturen måles fra arbeidsflaten stykke.

En stikkontakt (AC) gir strøm til enheten noe som betyr at HM35 står ved siden av arbeidsstykket og Tilpasning til oppvarming er praktisk å gjøre. HM35 opprettholder et arbeidsstykke ved jevn temperatur under sveising.

HM35 is a multipurpose heating unit which uses induction coils or heating resistors. Depending on the size of the pipe or workpiece, one or two units are used. Induction coils or resistors are placed on both sides of the weld seam and when using only one heating unit they are connected in series with a jumper cable. Induction coils are easy to install and they can be used in tight working places.

INDUCTION HEATING

Equipment when using one HM35 unit for heating a pipe weld with maximum diameter of Ø355 mm

HM35 unit with two induction coils

    Qty Code Product

A    1    1000520 HM35 heating unit

B    1    1101002 Secondary set 2,5, L=2,5m

C    1    1102502 Jumper cable 0,5, L=0,5m

D    2   14005xx Induction coil HM-IC-xx, length according to the pipe L=400+4×3,14xDu

Equipment when using two HM35 units for heating a pipe weld with maximum diameter of Ø355-508 mm

Using two HM35 unit with induction coils

     Qty       Code          Product

A    2      1000520 HM35 heating unit

B    2      1101002  Secondary set 2,5, L=2,5m

C    2      14005xx  Induction coil HM-IC-xx, length according to the pipe L=400+4×3,14xDu

RESISTANCE HEATING

Equipment when using one HM35 unit for heating a pipe weld with half size heating mats

HM35 unit with two half size heating mats

     Qty     Code           Product

A    1       1000520   M35 heating unit

B    1       1101002    Secondary set 2,5, L=2,5m

C    1       1102502    Jumper cable 0,5, L=0,5m

D    2      20011xx    VHVP type, half size heating mat

Equipment when using two HM35 units for heating a pipe weld with full size heating mats

Using two HM35 units with full size heating mats

     Qty     Code           Product

A    2      1000520   M35 heating unit

B    2      1101002    Secondary set 2,5, L=2,5m

C    2      2000xxx   VHV type, full size heating mat

Kontakt Oss

PRODUKTKODER